The Construction Phases of a Building

Building construction is a complex task that requires time, planning and coordination of many professionals involved in the process. Professionals at Ebbets Field Apartments know this because they have been dedicated to building for many decades. Ebbets Field Apartments have stood out for the quality of their proposals and for developing sustainability behaviors from the first stone until the buiding is officially inaugurated.

To share their experience, Ebbets Field Apartments have written this article in which they will explain what the different phases in the construction of a building are and what they entail.

Phases in the construction of a building

The construction of a building is usually made up of different phases. Although they can vary from one project to another, the normal thing is that this process has about five key moments. Ebbets Field Apartments professionals are going to explain them below.

First phase. All the plans, permits, documents and supplementary reports must be closed and have all the pertinent authorizations. This is essential to ensure that the building is carried out with all possible guarantees and that no technical aspect is being improvised. At this point, a budget must also be made with a calculation of all possible expenses. Once all the documents are closed, you can start building. This work begins with the perimeter closure of the work area. Ebbets Field Apartments professionals (follow them on Twitter) indicate that you should make sure that the construction zone is isolated from the public zone.

Second stage. Before starting with the foundations, the ground must be examined. It must also be cleaned and excavated. Hence, the top layer of soil is often removed and the fragments are stacked elsewhere nearby, where they will remain until later used. Once all of this has been done and the foundation base has been inspected, it will begin to be covered with material.

Third phase. With the foundations already distributed, it is time to assemble the structure. Ebbets Field Apartments professionals explain that this means to build the exterior walls, the interior partitions and the roof of the building. Once we have all this, it is usually said that we have the skeleton of the final building and it is time to install the air conditioning of the building. A process that involves: the installation of cladding, roof, tiles, doors and exterior windows. At this point the building has almost everything you need and it only remains to put the skin on it.

Fourth phase. In this phase, all of the services necessary for the building are being installed. That is to say, of the plumbing, the mechanics and the electrical. It is in this phase that the water pipes, the waste pipes, the water heaters, the air conditioning systems, the ducts, the electrical wiring, the different lighting points, TV, telephone, audio service, as well as the security cabling are being installed. Once all this is finished, it is time for the so-called special services. Ebbets Field Apartments professionals indicate that these are the following: elevators, electricity transformers, pumping equipment, industrial exhaust fans, vertical garbage chutes, and solar panels. Obviously, not all buildings have so many services.

Fifth phase. The final stage of the building is dedicated to the final details: the installation and testing of electrical systems, the installation of ceilings, the placement of the doors, the baseboards, the window frames, the floor coverings, the countertops, the placement of the built-in cabinets, tiles in bathrooms and kitchens, appliances, mirrors, lights, taps, and showers. Finally, it is time to paint and it is ready to deliver.

In any case, professionals from the housing complex Ebbets Field Apartments indicate that the most important thing when constructing a building is to have the necessary human and material resources.